Supported Platforms

Revision as of 15:14, 28 February 2020 by Carlo (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Up to four hardware platforms can be attached to D-Cube's observer nodes. Currently, two platforms are supported:

  1. Tmote Sky. D-Cube embeds 48 Advanticsys MTM-CM5000-MSP motes: IEEE 802.15.4-compliant wireless sensor nodes based on the original open-source TelosB (Tmote Sky) platform design developed and published by the University of California, Berkeley (datasheet). Based on the MSP430 microcontroller and the IEEE 802.15.4-compliant Texas Instruments CC2420 radio transceiver, the Berkeley motes have been driving wireless sensor networks and IoT research for the past 15 years, and a large number of low-power wireless protocols have been ported and tested on this platform.

  2. Empty.png
    Observer connected to a Tmote Sky.
  3. nRF52840. D-Cube embeds 48 Nordic Semiconductors nRF52840-DK nodes: versatile single-board development kits for Bluetooth 5, Bluetooth mesh, Thread, Zigbee, IEEE 802.15.4, ANT, and 2.4 GHz proprietary applications (datasheet). Based on an ARM Cortex-M4 with floating point support, the nRF52840 is one of the new-generation IoT platforms. The nRF52840 has received attention from the low-power wireless community thanks to its support for multiple radio technologies, as well as for its support for BLE 5 and its improved PHY layer modes, which support a longer communication range and high on-air data rates.

  4. Empty.png
    Observer connected to Tmote Sky & nRF52840.